MortarNet™ with Insect Barrier™ | The Original Mortar Dropping Collection Device
|AVITRU MasterSpec Section 042000 Unit Masonry - Download DOC|
|AVITRU MasterSpec Section 042613 Masonry Veneer - Download DOC|
Short Form Specification
04 05 23
Cavity Wall Specifications
Provide trapezoidal shaped Mortar Net® with Insect Barrier™ to suspend mortar droppings at unequal heights allowing moisture to drain from the cavity and maintain airflow within the cavity wall.
The trapezoidal shaped Mortar Net with Insect Barrier is a structural strand polymer mesh available in 0.4″ (10.16 mm), 1″ (25.4 mm), 1.5″ (38.1 mm), and 2” (50.8 mm) thickness.
The insect barrier is a densely weaved membrane attached to the face of the Mortar Net. Install per manufacturer’s instructions.
Product: Subject to compliance with requirements, provide trapezoidal shaped Mortar Net with Insect Barrier as manufactured by Mortar Net Solutions.
Mortar Net Solutions
6575 Daniel Burnham Drive, Ste G