fbpx Menu Menu QUESTIONS?

Expanded Corner Bead

This solid nose, all-purpose exterior corner bead is strong and economical. The wide, expanded-wing flanges are flexible and can compensate for most irregular surfaces providing even grounds and straight corners. The expanded steel near the nose of the corner bead provides multiple plastering and stucco keys allowing for reinforcement and strength where it is needed the most.

Size & Packaging

LENGTH PCS./CTN. FT.CTN CTN./SKID WT./CTN
10′ 30 300′ 20 49 lbs
1a-expanded-corner-bead
Expanded Corner Bead

Weep Sill Screed

The weep screed is for hard-coat stucco, thin-veneer stone, and 1-coat stucco over foam applications. Installed at the juncture of the sill and the exterior concrete foundation, it allows trapped moisture or water to drain to the exterior of the building. It provides straight edge stops for applied plaster stucco and E.I.F.S. (Exterior Insulation Finishing Systems) with exacting grounds and protective weeps.

Size & Packaging

GROUND FLANGE LENGTH PCS./BDL PCS./PALLET
7/8″ 3-1/2″ 10′ 10 500
weep-screed
Weep Sill Screed

Double-V Control Joint

#15 Expanded Flange Control Joint (Double-V) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco areas. The Double-V Control Joint counteracts the inherent shrinkage during stucco curing and general thermal changes. This nearly inconspicuous, expanded wing control joint minimizes cracking and assures proper plaster and stucco thickness.

Size & Packaging

GROUND LENGTH PCS./CTN FT./CTN CTN./SKID
3/4″ 10′ 24 240 30
Double-V Control Joint
Double-V Control Joint
en_USEnglish