Menu Need Help?

Description

The patented TotalFlash Roll Cavity Wall Drainage Solution is a factory-assembled masonry cavity wall flashing system. It combines a flashing membrane, mortar dropping collection drainage mat, and drainage mesh weep tabs into a single, easy-to-install 50′ roll. It provides superior moisture protection, slashes labor costs, and can be custom configured for your job, usually at no additional charge.

Features

  • Sold in 50′ rolls
  • 90% open-weave polyester mesh mortar dropping collection mat and weep tabs
  • 18″ standard height
  • Additional available sizes: 12″, 24″ (Custom sizes available on request)
  • Five available membranes
  • FREE takeoff service and custom sizing on awarded projects
  • Drip edges, termination bars, and termination bar mounting screws available separately

Sizes and Packaging

STANDARD THICKNESS ROLL HEIGHT ROLL LENGTH ROLLS/BOX LF/BOX
EPDM – 0.045″All other membranes – 0.040″ 12″ 50′ 3 150
18″ 50′ 2 100
24″ 50′ 1 50
– Custom sizes are available on request
– 100 self-tapping #14 x 2″ termination bar screws per box

Recycled Content

MATERIAL RECYCLED CONTENT LEED FORM
Drainage mat/weep tabs 40% Pre-consumer Request
PVC termination bar 100% Pre-consumer
Thermoplastic vinyl membrane 55% Pre-consumer
Stainless steel drip edge 80% Post-consumer
Kynar® drip edge 23% Post-consumer

Component Options

  • Flashing membranes
    • Thermoplastic Vinyl: UV Stable
    • Rubberized Asphalt: 0.032” rubberized asphalt bonded to 0.008” polyethylene film, self-adhering, excellent tensile/elongation/permanence characteristics, temperature resistant to 245° F
    • Copper Laminate: 5 oz. Copper sheet reinforced with 2 layers of fiberglass fabric
    • Thermoplastic Polyolefin (TPO): UV stable, ozone resistant, chlorine-free, recyclable
    • EPDM synthetic rubber

Available Options Sold Separately

  • Termination bars:
    • PVC: 1.125” high x 0.120” thick x 10’ 0” long, UV stabilized, non-migratory plasticizers, high strength, corrosion resistant, pre-drilled holes
    • Stainless Steel: 1.25” high x 16 gauge thick, pre-drilled holes 6″ on-center, 100% recyclable
    • Stainless Steel: 1.25″ high x 16 gauge thick, 1/4″ lip, pre-drilled holes 6″ on-center, 100% recyclable
  • Drip edges
    • Stainless Steel:  3.0″ high x 28 gauge, 3/8” hemmed edge, 100% recyclable
    • Cold-rolled Copper:  3.0″ high x 24 gauge, 3/8” hemmed edge, 100% recyclable
    • Kynar®-coated galvanized steel: 3.0″ high x 24 gauge, 3/8” hemmed edge, 4 color choices (Almond, Tan, Gray, Terra-cotta)
  • CompleteFlash™  – TPO, or synthetic rubber/polypropylene blend:
    • 14″ High inside/outside Corner Boots
    • End Dams: right, left, universal