MortarNet^® is the leading mortar collection product providing the solution for clogged weep holes in masonry cavity construction. MortarNet with Insect Barrier ensures masonry walls breathe, drain and dry quickly and efficiently.

TotalFlash is a unique flashing solution for masonry cavity walls.  It integrates the flashing membrane with a mortar dropping collection device, weep tabs, drip edge and termination bar to create easy-to-install panels that are 100% effective in channeling moisture out of the cavity.

BlockFlash^® is an embeddable flashing device for exterior single wythe C.M.U. wall systems. It collects moisture that infiltrates the wall and flows down the vertical cores and diverts it to the exterior. BlockFlash is useful at all flashing/weep hole locations including base of wall, above door and window openings, above bond beams, in parapet walls, basements and any other locations where flashing is necessary.

Residential HouseNet^®'s trapezoidal shape prevents mortar droppings from forming a continuous dam and its shape, in combination with its 90% open mesh weave, allows water to rapidly and easily move through the material of the product to the weep holes.

WallNet is a lightweight sheet of tough, 90% open-weave polyester-mesh drainage fabric designed to let stucco, stone and other thin veneered walls drain and dry quickly and completely.  Install it continuously between the structural wall and the veneer to help prevent water damage.

Our WeepVents™—made of the same 90%-open-weave polyester mesh as MortarNet with Insect Barrier and HouseNet—are a simple way to ensure that moisture can migrate to weep holes, and air circulates freely. Moreover, they enhance the finished look of the wall.

CellVent™ by MortarNet^® are installed in the weep vents of masonry cavity walls to help ensure that moisture can migrate out of and air can circulate into the cavity, and that insects can't enter the cavity through the weeps.  CellVent is available in 6 colors and clear to match most wall designs.